Reaktor, FM8, Absynth and Massive are all on sale for $99 each from November 27th through 30th only (and available from the NI store only). Here’s the link. Happy tweaking!
So today was a nightmare. I got the dreaded DAE -4 followed by a DAE -9003 error. This indicates a communication problem with the DSP cards. Digidesign says it could be a faulty Core or Process card which means I’d have to send it in for repair and be out of commission in the mean time.
In the end, I got it fixed but not before some serious headaches and cursing. Turns out my DSP chips are fine (I hope) and it was corrupt preferences (shocking, digi preferences getting corrupt? Noooo).
The Steps I took to get to a resolution:
First I trashed DigiSetup.OSX in my user prefs folder (users/yourusername/library/preferences/) and rebooted. Same problem.
I ran digitest to check the DSPs… it kept crashing and I rebooted, ran the test, rebooted, ran the test, etc. with the same results.
I then trashed DAE Prefs — still a no go.
Turned the machine off, powered down the 96, checked the cable connectors in the back of the machine. Tried again. No go.
This time I deleted all four preference files (com.digidesign.ProToolsHD.plist, DAE Prefs folder, DigiSetup.osx and ProTools v8.0 Preferences).
PRESTO. It works. So all four prefs gone and wiggling cables solved the problem – for now. Ran digitest application and results came back with a passing score. I know I say it again and again that trashing prefs resolves a lot of problems and this case was no different. I’ll be pulling my machine out and dusting the inside just for good measure – after all, dust is a conductor and can fry components if you let it build up long enough.
Here’s a link to Digi’s site about the -9003 error: http://tinyurl.com/y9rn4c8
Here’s another link regarding the -4 error: http://tinyurl.com/y939t4t
And here’s to hoping you (or I) never encounter the -4 error for real!!
Get new noisefreak blog posts delivered to your email as soon as they come out! Just enter your email address below.